Where To Start with and More

Undergoung Utilities and their Standard Colors

If you find underground utilities, you can easily determine what type of utility it is for. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. Although not completely eliminated, risks today have been reduced. It is thus important that we know how to identify these underground utilities if there is a need to dig the ground so that you can prevent harm. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. Otherwise it can be something disastrous. The worst thing that can happen if lines are not identified is that fatal injuries can happen. The location of the areas where the lines were struck can experience service interruption. People can call 811 to prevent these incidents, before they proceed with digging their property. When the number is called, you can let the utility companies come out and mark their respective lines.

Sometimes, even if the lines are marked accidents still happen. The reality is that there is an incident almost every 6 minutes where utility line are struck. Traffic lights, wastewater pipes, telecommunication lines, etc. are affected when lines are struck. These incidents affect public health and safety.

GPR or Ground Penetrating Radar is used by companies to locate their utility lines. This has made it easier to locate utility lies underground and other important things. However, for the ordinary homeowner, it is enough to simply call 811 to be able to let companies located their lines.

Today, utility lines are marked with different colors for easy identification. The colors below indicate the kind of utility uses it.

Proposed excavation sites use white lines. You can mark areas with white lines that will soon be excavated.

Pink lines are temporary survey markings. Surveyors use pink lines to mark off legal property boundaries.

Electric power lines, cable, conduit, and lighting cable use red lines. The color red is perfect for electric works because it is associated with fire and danger.

Lines for gas, oil, steam, petroleum, and gaseous materials use the color yellow. The bright color yellow is used to be a warning sign since a natural gas leak can create a potentially disastrous situation.

Communication, alarm, signal lines, cable, or conduit use orange lines. Blue lines are used for potable water. Purple lines are used for reclaimed water, irrigation, and slurry lines. If you see the color green, then it indicates sewer and drain lines. You can derail any project for a long time if you hit these lines.

You can learn more about the color coding of utility lines if you click here now! You can view here for more.

Related posts